Power Transmission › Electric Motor Brakes › Brake Selector

Dings · Spring-Set Electric Motor Brakes

Dings Brake Selector

Find the Dings brake that fits your motor. Choose the torque you need, the NEMA motor frame and the enclosure, and we will show every matching Dings brake style with its manual. Gordon Russell is an authorized Dings distributor and rebuilds Dings brakes in our shop.

Request a Quote

Choose your brake

Not sure of the torque? A common rule of thumb is motor full-load torque (lb-ft) = HP × 5,252 ÷ RPM, with a service factor added for the application. Send us the motor nameplate and we will size it.

27 brake styles · 70 Series Brakes

Dings 1-70 Series End Mount Flexmount

Dings 1-70 Series End Mount Flexmount

Torque 1.5 to 25 lb-ftFrames 182TC through 256TCEnclosure NEMA 2, IP41Max speed 3600 rpm

70 Series Brakes →Manual BK4755 (PDF)Request a quote

Specifications, base models and options

Base models	71001-115, 71003-115, 72006-115, 72010-115, 73015-115, 73020-115, 74025-115
Mounting	Motor end mount
Enclosure	Dripproof Enclosure: NEMA 2, CSA 2, IP41 Aluminum bracket, stamped steel cover and steel adapter plate Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	15-20 milliseconds (release and set)
Thermal capacity	6 HPS/Min
Coil	Single phase AC; DC coils available
Design features	Direct acting design with no linkages to break One moving part for longer life Torque adjustable for specific applications Splined hub Spring set, electrically released Manual release, automatic reset Plated internal parts – RoHS compliant
Options (suffix)	H Heavy Duty Friction Disc(s) M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 2, Cast Iron Cover

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 2, Cast Iron Cover

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 2, IP43Max speed 3600 rpm

70 Series Brakes →Manual BK4772-1 (single phase) (PDF)Manual BK4772-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-EC41, 71015-EC41, 72025-EC41, 72035-EC41, 73050-EC41, 74075-EC41, 74105-EC41
Mounting	Motor end mount
Enclosure	Dripproof Enclosure: NEMA 2, CSA 2, IP43 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 2, Steel Cover

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 2, Steel Cover

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 2, IP43Max speed 3600 rpm

70 Series Brakes →Manual BK4772-1 (single phase) (PDF)Manual BK4772-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-ES41, 71015-ES41, 72025-ES41, 72035-ES41, 73050-ES41, 74075-ES41, 74105-ES41
Mounting	Motor end mount
Enclosure	Dripproof Enclosure: NEMA 2, CSA 2, IP43 Cast iron bracket and stamped steel cover Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 2, Steel Cover

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 2, Steel Cover

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 2, IP43Max speed 3600 rpm

70 Series Brakes →Manual BK4772S-1 (single phase) (PDF)Manual BK4772S-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-ES4S, 71015-ES4S, 71025-ES4S, 72035-ES4S, 72050-ES4S, 73075-ES4S, 74105-ES4S
Mounting	Motor end mount
Enclosure	Dripproof Enclosure: NEMA 2, CSA 2, IP43 Cast iron bracket and stamped steel cover Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 2, Cast Iron Cover

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 2, Cast Iron Cover

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 2, IP43Max speed 3600 rpm

70 Series Brakes →Manual BK4772S-1 (single phase) (PDF)Manual BK4772S-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-EC4S, 71015-EC4S, 71025-EC4S, 72035-EC4S, 72050-EC4S, 73075-EC4S, 74105-EC4S
Mounting	Motor end mount
Enclosure	Dripproof Enclosure: NEMA 2, CSA 2, IP43 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 4 without hub seal

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 4 without hub seal

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4773S-1 (single phase) (PDF)Manual BK4773S-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-EC6S, 71015-EC6S, 71025-EC6S, 72035-EC6S, 72050-EC6S, 73075-EC6S, 74105-EC6S
Mounting	Motor end mount, without hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 4 without hub seal

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 4 without hub seal

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4773-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-EC61, 71015-EC61, 72025-EC61, 72035-EC61, 73050-EC61, 74075-EC61, 74105-EC61
Mounting	Motor end mount, without hub seal
Enclosure	Waterproof/Dust tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 4 with hub seal

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 4 with hub seal

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4773-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-SC61, 71015-SC61, 72025-SC61, 72035-SC61, 73050-SC61, 74075-SC61, 74105-SC61
Mounting	Motor end mount, with hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 4 with hub seal

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 4 with hub seal

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4773S-1 (single phase) (PDF)Manual BK4773S-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-SC6S, 71015-SC6S, 71025-SC6S, 72035-SC6S, 72050-SC6S, 73075-SC6S, 74105-SC6S
Mounting	Motor end mount, with hub seal
Enclosure	Waterproof/Dust tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 2, Cast Iron Cover

Dings 70 Series End Mount Diract 4 Post NEMA 2, Cast Iron Cover

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 2, IP41Max speed 3600 rpm

70 Series Brakes →Manual BK4605 (PDF)Request a quote

Specifications, base models and options

Base models	71010-55, 71015-55, 72025-55, 72035-55, 73050-55, 74075-55
Mounting	Motor end mount
Enclosure	Dripproof Enclosure: NEMA 2, CSA 2, IP41 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications Manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 2, Steel Cover

Dings 70 Series End Mount Diract 4 Post NEMA 2, Steel Cover

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 2, IP41Max speed 3600 rpm

70 Series Brakes →Manual BK4705 (PDF)Request a quote

Specifications, base models and options

Base models	71010-97, 71015-97, 72025-97, 72035-97, 73050-97, 74075-97
Mounting	Motor end mount
Enclosure	Dripproof Enclosure: NEMA 2, CSA 2, IP41 Cast iron bracket and stamped steel cover Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications Manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4 with hub seal, Mark II Release

Dings 70 Series End Mount Diract 4 Post NEMA 4 with hub seal, Mark II Release

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual: contact usRequest a quote

Specifications, base models and options

Base models	71010-112, 71015-112, 72025-112, 72035-112, 73050-112, 74075-112
Mounting	Motor end mount, with hub seal, Mark II Release
Enclosure	Waterproof/Dust tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External Mark II manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4 without hub seal, Steel Cover

Dings 70 Series End Mount Diract 4 Post NEMA 4 without hub seal, Steel Cover

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4715 (PDF)Request a quote

Specifications, base models and options

Base models	71010-100, 71015-100, 72025-100, 72035-100, 73050-100, 74075-100
Mounting	Motor end mount, without hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron bracket and stamped steel cover Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications Manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4 without hub seal, Cast Iron Cover

Dings 70 Series End Mount Diract 4 Post NEMA 4 without hub seal, Cast Iron Cover

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4605 (PDF)Request a quote

Specifications, base models and options

Base models	71010-58, 71015-58, 72025-58, 72035-58, 73050-58, 74075-58
Mounting	Motor end mount, without hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications Standard manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4 with hub seal, Cast Iron Cover

Dings 70 Series End Mount Diract 4 Post NEMA 4 with hub seal, Cast Iron Cover

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4605 (PDF)Request a quote

Specifications, base models and options

Base models	71010-57, 71015-57, 72025-57, 72035-57, 73050-57, 74075-57
Mounting	Motor end mount, with hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications Standard manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 2, Mark II Release

Dings 70 Series End Mount Diract 4 Post NEMA 2, Mark II Release

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 2, IP41Max speed 3600 rpm

70 Series Brakes →Manual: contact usRequest a quote

Specifications, base models and options

Base models	71010-89, 71015-89, 72025-89, 72035-89, 73050-89, 74075-89
Mounting	Motor end mount, Mark II Release
Enclosure	Dripproof Enclosure: NEMA 2, CSA 4, IP41 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External Mark II manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4 with hub seal, Steel Cover

Dings 70 Series End Mount Diract 4 Post NEMA 4 with hub seal, Steel Cover

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4715 (PDF)Request a quote

Specifications, base models and options

Base models	71010-102, 71015-102, 72025-102, 72035-102, 73050-102, 74075-102
Mounting	Motor end mount, with hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron bracket and stamped steel cover Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications Manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4 without hub seal, Mark II Release

Dings 70 Series End Mount Diract 4 Post NEMA 4 without hub seal, Mark II Release

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual: contact usRequest a quote

Specifications, base models and options

Base models	71010-111, 71015-111, 72025-111, 72035-111, 73050-111, 74075-111
Mounting	Motor end mount, without hub seal, Mark II Release
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External Mark II manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4 without hub seal, Mark III Release

Dings 70 Series End Mount Diract 4 Post NEMA 4 without hub seal, Mark III Release

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual: contact usRequest a quote

Specifications, base models and options

Base models	71010-109, 71015-109, 72025-109, 72035-109, 73050-109, 74075-109
Mounting	Motor end mount, without hub seal, Mark III Release
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4 with hub seal, Mark III Release

Dings 70 Series End Mount Diract 4 Post NEMA 4 with hub seal, Mark III Release

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4, IP56Max speed 3600 rpm

70 Series Brakes →Manual: contact usRequest a quote

Specifications, base models and options

Base models	71010-110, 71015-110, 72025-110, 72035-110, 73050-110, 74075-110
Mounting	Motor end mount, with hub seal, Mark III Release
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External Mark III manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 2, Mark III Release

Dings 70 Series End Mount Diract 4 Post NEMA 2, Mark III Release

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 2, IP56Max speed 3600 rpm

70 Series Brakes →Manual: contact usRequest a quote

Specifications, base models and options

Base models	71010-56, 71015-56, 72025-56, 72035-56, 73050-56, 74075-56
Mounting	Motor end mount, Mark III Release
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4, CSA 4, IP56 Cast iron enclosure Red oxide primer paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External Mark III manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs M Military Marine Finish N Non-Military (Maritime) Marine Finish P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4X without hub seal

Dings 70 Series End Mount Diract 4 Post NEMA 4X without hub seal

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4X, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4629 (PDF)Request a quote

Specifications, base models and options

Base models	71010-92, 71015-92, 72025-92, 72035-92, 73050-92, 74075-92
Mounting	Motor end mount, without hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4X, CSA 4, IP56 Cast iron enclosure FDA Approved white exterior epoxy paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications Manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount Diract 4 Post NEMA 4X with hub seal

Dings 70 Series End Mount Diract 4 Post NEMA 4X with hub seal

Torque 10 to 75 lb-ftFrames 182TC through 256TCEnclosure NEMA 4X, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4629 (PDF)Request a quote

Specifications, base models and options

Base models	71010-94, 71015-94, 72025-94, 72035-94, 73050-94, 74075-94
Mounting	Motor end mount, with hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4X, CSA 4, IP56 Cast iron enclosure FDA Approved white exterior epoxy paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications Manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter B Aluminum Bronze Stationary Disc(s) E Ductile Iron Stationary Disc(s) F Foot Mounting Bracket H Heavy Duty Friction Disc(s) J High Tensile Studs P Tropical Protection Q Class H Insulation R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 4X without hub seal

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 4X without hub seal

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 4X, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4774-1 (single phase) (PDF)Manual BK4774-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-EC6W, 71015-EC6W, 72025-EC6W, 72035-EC6W, 73050-EC6W, 74075-EC6W, 74105-EC6W
Mounting	Motor end mount, without hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4X, CSA 4, IP56 Cast iron enclosure FDA Approve white exterior epoxy paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 4X without hub seal

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 4X without hub seal

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 4X, IP56Max speed 3600 rpm

70 Series Brakes →Manual: contact usRequest a quote

Specifications, base models and options

Base models	71010-EC6T, 71015-EC6T, 71025-EC6T, 72035-EC6T, 72050-EC6T, 73075-EC6T, 74105-EC6T
Mounting	Motor end mount, without hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4X, CSA 4, IP56 Cast iron enclosure FDA Approve white exterior epoxy paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 4X with hub seal

Dings 70 Series End Mount 8700 Style (Dings Standard Hub) NEMA 4X with hub seal

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 4X, IP56Max speed 3600 rpm

70 Series Brakes →Manual BK4774-1 (single phase) (PDF)Manual BK4774-3 (three phase) (PDF)Request a quote

Specifications, base models and options

Base models	71010-SC6W, 71015-SC6W, 72025-SC6W, 72035-SC6W, 73050-SC6W, 74075-SC6W, 74105-SC6W
Mounting	Motor end mount, with hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4X, CSA 4, IP56 Cast iron enclosure FDA Approve white exterior epoxy paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 4X with hub seal

Dings 70 Series End Mount 8700 Style (Alternate Hub Configuration) NEMA 4X with hub seal

Torque 10 to 105 lb-ftFrames 182TC through 256TC/UCEnclosure NEMA 4X, IP56Max speed 3600 rpm

70 Series Brakes →Manual: contact usRequest a quote

Specifications, base models and options

Base models	71010-SC6T, 71015-SC6T, 71025-SC6T, 72035-SC6T, 72050-SC6T, 73075-SC6T, 74105-SC6T
Mounting	Motor end mount, with hub seal
Enclosure	Waterproof/Dust-tight Enclosure: NEMA 4X, CSA 4, IP56 Cast iron enclosure FDA Approve white exterior epoxy paint
C-face register (AK / AJ)	8.50 in. / 7.25 in. bolt circle
Reaction time	20-25 milliseconds (release and set)
Coil	Single or three phase AC
Design features	RoHS compliant No disassembly required for mounting Direct acting design with no linkages to break Torque adjustable for specific applications External manual release with automatic reset One moving part for longer life Splined hub Spring set, electrically released
Options (suffix)	A Adapter to Next larger Frame Size AB Reverse Adapter F Foot Mounting Bracket H Heavy Duty Friction Disc(s) P Tropical Protection R Internal Space Heater S Stainless Steel Stationary Disc(s) T Through Shaft V All Position Vertical Mounting VO Vertical Over Motor Mounting VU Vertical Under Motor Mounting XS Microswitch Warning

Specifications are from Dings published data. Confirm the final selection with a Gordon Russell specialist before ordering.

Browse by series

40 & 50 SeriesSmall-frame brakes, 3/8 to 6 lb-ft 60 Series56C to 145TC, 1.5 to 25 lb-ft 70 Series182TC to 256TC, up to 105 lb-ft 80 & 90 Series284TC to 405TC, 25 to 450 lb-ft Double C-Face & Double-ShaftedBrakes mounted between motor and reducer Hazardous Location & NavalNEMA 7 & 9 and naval service duty

Request a Quote

Send the Dings model number from the nameplate, or your motor HP, RPM, frame, voltage and enclosure. A Gordon Russell specialist will follow up with the right brake, availability and pricing. We also rebuild Dings brakes in our shop.

Request a Quote